鐵藝大門保養技巧：

Maintenance tips for iron gate:

1、避免磕碰

1. Avoid collisions

這是購得鐵藝門后最先要注意到的一點，鐵藝門在搬運過程中應小心輕放;放置鐵藝門的地方應是硬物不常碰到的地方;地方一經選定，就不應頻繁變動;安裝鐵藝門的墻面還應保持平整，使鐵藝門安裝安穩、平實，若搖晃不穩，日久會使鐵藝門產生輕微變形，影響鐵藝門的使用壽命。

This is the first thing to pay attention to after purchasing an iron gate. Iron gates should be handled with care during transportation; The place where iron doors are placed should be a place where hard objects are not frequently touched; Once a place is selected, it should not change frequently; The wall surface for installing the iron door should also be kept flat to ensure a stable and even installation. If it is shaken unstable, it will cause slight deformation of the iron door over time, affecting its service life.

2、遠離酸堿

2. Stay away from acidity and alkalinity

對鐵藝門有腐蝕作用的酸堿是鐵藝門的"頭號殺手"。鐵藝門上若不慎沾上了，應立即用清水把污處沖凈，再用干棉布擦干。

The acid and alkali that have a corrosive effect on the Iron Art Gate are the number one killers of the Iron Art Gate. If it accidentally gets on the iron door, it should be immediately rinsed off with clean water and wiped dry with a dry cotton cloth.

3、要定期除塵

3. Regular dust removal is required

戶外塵埃飛揚，日積月累，鐵藝設施上會落上一層浮塵。它會影響鐵藝的色澤，進而導致鐵藝保護膜的破損。所以應定期擦拭戶外鐵藝設施，一般以柔軟件的棉織品擦拭為好。

Outdoor dust is flying, accumulating over time, and a layer of floating dust will fall on the iron facilities. It will affect the color of the ironwork, leading to the damage of the ironwork protective film. Therefore, outdoor ironwork facilities should be regularly wiped, and it is generally better to use soft cotton fabrics for wiping.

4、要注意防潮

4. Pay attention to moisture prevention

如果只是一般的戶外空氣濕度，您可以放心鐵藝設施的防銹性。如逢大霧天氣，應用干棉布擦拭鐵藝上的水珠；若逢雨天，應于雨停后及時把水珠擦干。鐵藝門應安裝在比較通風的地方，潮濕會使金屬過早出現銹蝕，鍍鉻產生脫膜等，影響門的使用。

If it's just general outdoor air humidity, you can rest assured of the rust resistance of iron facilities. In case of heavy fog, use a dry cotton cloth to wipe the water droplets on the ironwork; If it rains, the water droplets should be wiped dry in a timely manner after the rain stops. Iron doors should be installed in a well ventilated area, as dampness can cause premature rusting of the metal, chrome plating resulting in delamination, and affect the use of the door.

5、避免銹跡

5. Avoid rust stains

如果鐵藝大門生了銹，不要自作主張用砂紙打磨。銹跡較小較淺的，可用棉紗蘸機油涂于銹處，稍候片刻，用布揩擦便可消除銹跡。若銹跡已經擴大變重，則應請有關技術人員來維修。

If the iron gate rusts, don't take it upon yourself to use sandpaper to polish it. For areas with small and shallow rust, cotton yarn dipped in engine oil can be applied to the rust area. After a while, wipe with a cloth to eliminate the rust. If the rust has expanded and become heavier, relevant technical personnel should be invited to repair it.

鐵藝大門很有藝術感，而且堅固耐用，安裝在庭院比較合適，但平時也要注意保養，不然會影響門的壽命

The iron gate is very artistic and sturdy, making it suitable for installation in the courtyard. However, it is also important to pay attention to maintenance in daily life, otherwise it will affect the service life of the door